Instructions for Use:

1. Input Connection:

   • Connect the input voltage (VIN) to the positive terminal and ground (GND) to the negative terminal.
   • Ensure the input voltage is within the specified range (12V to 24V).

2. Output Connection:

   • Connect the output voltage (VOUT) to the load and ground (GND) to the negative terminal.
   • The output voltage is fixed at 5V.

3. Load Regulation:

   • The load regulation is typically 0.5%, meaning the output voltage will remain stable under varying load conditions.

4. Line Regulation:

   • The line regulation is typically 0.2%, ensuring the output voltage remains stable with changes in input voltage.

5. Thermal Management:

   • Ensure adequate heat dissipation to keep the operating temperature within the specified range (-40°C to 85°C).
   • The thermal resistance (θJA) is typically 20°C/W.

6. Storage:

   • Store the device in a dry environment within the storage temperature range (-65°C to 150°C).

7. Efficiency:

   • The efficiency ranges from 85% to 95%, depending on the load and input conditions.

8. Switching Frequency:

   • The switching frequency can vary from 100kHz to 500kHz, which affects the ripple voltage and efficiency.

9. Ripple Voltage:

   • The typical ripple voltage is 50mVpp, with a maximum of 100mVpp.

10. Quiescent Current:

    • The quiescent current is typically 15mA, which is the current consumed by the device when no load is applied.

11. Safety Precautions:

    • Always ensure proper grounding and isolation to prevent electrical hazards.
    • Do not exceed the maximum ratings to avoid damage to the device.

12. Testing:

    • Before connecting the device to a load, test the output voltage and current to ensure it meets the specifications.