Instructions for Use

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 2.0V to 5.5V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Input Voltage Levels:

   • For a valid low input, the voltage should be less than or equal to 0.8V.
   • For a valid high input, the voltage should be greater than or equal to 2.0V.

3. Output Voltage Levels:

   • The output low voltage (V_OL) will typically be around 0.1V to 0.4V.
   • The output high voltage (V_OH) will typically be at least 2.4V.

4. Propagation Delay Time (t_pd):

   • The typical propagation delay time is 6ns, with a maximum of 13ns.
   • This value can vary depending on the specific operating conditions.

5. Power Dissipation (P_D):

   • The maximum power dissipation is 100mW. Ensure adequate heat dissipation to avoid overheating.

6. Operating Temperature Range (T_A):

   • The device is designed to operate within a temperature range of -40°C to 85°C.
   • Avoid operating outside this range to ensure reliable performance.

7. Storage Temperature Range (T_STG):

   • The device can be stored in temperatures ranging from -65°C to 150°C.
   • Store the device in a dry, cool place to maintain its integrity.

8. Handling and Installation:

   • Handle the device with care to avoid static discharge.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.
   • Ensure proper soldering techniques to avoid thermal stress on the device.

9. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration and connections.
   • Ensure all pins are correctly connected to their respective signals and power supplies.

10. Testing and Verification:

    • After installation, verify the functionality of the device using appropriate test equipment.
    • Check for correct voltage levels and signal timing to ensure proper operation.