Instructions for Use:

1. Handling Precautions:

   • Handle the diode with care to avoid damage.
   • Ensure that the leads are not bent excessively close to the body of the diode.

2. Mounting:

   • Solder the diode within the recommended temperature range of 260°C for no more than 10 seconds.
   • Allow sufficient cooling time after soldering to prevent thermal shock.

3. Electrical Connections:

   • Connect the cathode (shorter lead or marked side) to the positive voltage and the anode (longer lead) to the negative voltage.
   • Ensure that the reverse voltage does not exceed the rated Zener voltage to prevent breakdown.

4. Operating Conditions:

   • Operate the diode within the specified temperature range to ensure reliable performance.
   • Do not exceed the maximum power dissipation to avoid overheating and potential failure.

5. Storage:

   • Store the diode in a dry, cool place away from direct sunlight and corrosive environments.

6. Testing:

   • Use a multimeter to test the diode for continuity and correct polarity before installation.
   • Verify the Zener voltage by applying a reverse bias and measuring the voltage drop across the diode.

7. Safety:

   • Always follow standard safety procedures when handling electronic components.
   • Use appropriate personal protective equipment (PPE) when necessary.