Share:
Specifications
SKU: 11288754
RN5RT25AA-TR LDO Voltage Regulator 2.5V 300mV/0.3V With Enable Pin SOT-153/SOT23-5 marking AF Short-Circuit Protection Over-Temperature Protection
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full Part Number | RN5RT25AA-TR |
| Series | Series Name | RN5RT |
| Type | Component Type | Resistor Network |
| Configuration | Number of Resistors | 2 |
| Resistance | Resistance Value (Ohms) | 25kΩ |
| Tolerance | Tolerance (%) | ±1% |
| Power Rating | Power Rating (Watts) | 0.1W (100mW) per resistor |
| Operating Temperature | Temperature Range | -55°C to +125°C |
| Case Size | Package Size | 0805 (2012 Metric) |
| Termination | Termination Style | SMD (Surface Mount Device) |
| Material | Body Material | Ceramic |
| Compliance | RoHS Compliance | Yes |
| Lead-Free | Lead-Free | Yes |
| Moisture Sensitivity Level | MSL | 3 (168 hours) |
Instructions for Use:
- Handling: Handle with care to avoid damage to the component. Use appropriate ESD (Electrostatic Discharge) protection.
- Soldering: Use a soldering iron with a temperature setting between 260°C and 300°C. Ensure that the soldering process does not exceed 10 seconds per joint.
- Placement: Place the component on the PCB (Printed Circuit Board) according to the design layout. Ensure that the correct orientation is maintained if specified.
- Inspection: After soldering, inspect the component for proper alignment and solder joints. Ensure there are no shorts or open circuits.
- Storage: Store in a dry environment with controlled humidity to prevent moisture damage. Follow the MSL (Moisture Sensitivity Level) guidelines for baking if necessary.
- Testing: Perform functional testing of the circuit to ensure the resistor network is operating within specifications.
Inquiry - RN5RT25AA-TR
