Instructions for Use:

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 2.5V to 5.5V.
   • Avoid exceeding the maximum supply voltage to prevent damage to the device.

2. Output Current:

   • The device can source up to 16mA (IOH) and sink up to 32mA (IOL).
   • Do not exceed these current limits to avoid overheating or damage.

3. Input Signals:

   • Input signals should be within the specified input low (VIL) and input high (VIH) voltage ranges.
   • Ensure that the input leakage current (IIH) does not exceed 10μA to maintain proper operation.

4. Propagation Delay:

   • The typical propagation delay time (tPD) is 10ns, with a maximum of 30ns.
   • This parameter is crucial for timing considerations in your circuit design.

5. Power Dissipation:

   • The maximum power dissipation (PD) is 400mW.
   • Ensure adequate heat sinking if operating near this limit to prevent thermal damage.

6. Temperature Range:

   • The operating temperature range (Toper) is from -40°C to 85°C.
   • The storage temperature range (Tstg) is from -65°C to 150°C.
   • Store and operate the device within these temperature limits to ensure reliability.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper ESD (Electrostatic Discharge) precautions when handling the device.

8. Mounting:

   • Ensure proper mounting on the PCB to avoid mechanical stress.
   • Follow the recommended soldering profile and reflow temperatures provided by the manufacturer.