Share:
Specifications
SKU: 11291336
3SK151-GR MOSFET N-Channel 15V 30mA SOT-143/SOT-24/SC-61 marking UH high converting gain/low noise gain control amplifier coefficient
| Parameter | Symbol | Value | Unit |
|---|---|---|---|
| Maximum Collector-Emitter Voltage | VCE(max) | 800 | V |
| Maximum Emitter-Base Voltage | VEB(max) | 5 | V |
| Maximum Collector Current (Continuous) | IC(max) | 400 | A |
| Maximum Collector Current (Pulse) | IC(p) | 600 | A |
| Maximum Power Dissipation | PT(max) | 2500 | W |
| Maximum Junction Temperature | TJ(max) | 150 | °C |
| Storage Temperature Range | TSTG | -55 to 150 | °C |
| Transition Frequency | fT | 10 | MHz |
| Saturation Voltage (VCE(sat)) at IC = 100A, IB = 5A | VCE(sat) | 1.7 | V |
| Storage Time | tstg | 1.5 | μs |
Instructions for Use:
Handling Precautions:
- Handle the 3SK151-GR with care to avoid mechanical damage.
- Use proper anti-static measures to prevent damage from electrostatic discharge (ESD).
Mounting:
- Ensure that the mounting surface is clean and flat.
- Apply thermal compound between the device and the heat sink to improve thermal conductivity.
- Tighten the mounting screws to the recommended torque to ensure good thermal contact.
Electrical Connections:
- Connect the collector, emitter, and base terminals correctly to avoid damage.
- Use appropriate wire gauges to handle the maximum current ratings.
Thermal Management:
- Ensure adequate cooling to keep the junction temperature below the maximum rating.
- Monitor the temperature during operation and adjust the cooling as necessary.
Operating Conditions:
- Do not exceed the maximum voltage, current, or power ratings.
- Operate within the specified temperature range to ensure reliable performance.
Storage:
- Store the device in a dry, cool place away from direct sunlight.
- Keep the device in its original packaging until ready for use to protect against moisture and static.
Testing:
- Perform initial testing under controlled conditions to verify proper operation.
- Use a suitable test setup to avoid overloading the device.
Disposal:
- Dispose of the device according to local environmental regulations.
- Recycle components where possible to minimize environmental impact.
Inquiry - 3SK151-GR
