Share:
Specifications
SKU: 11296166
EEPROMs-serial memory 24LC16BT-I/OT SOT-153/SOT23-5 marking M5RM
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Memory Capacity | 16K | Bits | ||||
| Operating Voltage | VCC | Standard | 2.5 | 5.0 | 5.5 | V |
| Operating Current (Read) | IR | VCC = 5V | 1.0 | 3.0 | 5.0 | mA |
| Operating Current (Write) | IW | VCC = 5V | 1.0 | 3.0 | 5.0 | mA |
| Standby Current | ISTBY | VCC = 5V | 0 | 1.0 | 5.0 | μA |
| Data Retention Time | tDR | VCC = 2.5V to 5.5V | 100 | 200 | 400 | Years |
| Write Cycle Time | tWC | VCC = 2.5V to 5.5V | 5 | 10 | 15 | ms |
| Page Write Size | 16 | Bytes | ||||
| Address Pin Count | 8 | Pins | ||||
| Operating Temperature | TA | Commercial | -40 | 0 | 85 | °C |
| Industrial Temperature | TA | Industrial | -40 | 0 | 85 | °C |
Instructions for 24LC16BT-I/OT
Power Supply:
- Ensure the operating voltage is within the specified range (2.5V to 5.5V).
- Use a stable power supply to avoid data corruption.
Data Access:
- The device uses the I2C protocol for communication.
- The device address is determined by the A0, A1, and A2 pins. Set these pins to ground or VCC to select the appropriate address.
- Read and write operations are initiated by the master device.
Write Operation:
- Start with a start condition followed by the device address and write bit.
- Send the memory address where data will be written.
- Send the data bytes to be written.
- End the operation with a stop condition.
- Wait for the write cycle time (tWC) before performing another write or read operation.
Read Operation:
- Start with a start condition followed by the device address and write bit.
- Send the memory address from which data will be read.
- Send a repeated start condition followed by the device address and read bit.
- Read the data bytes.
- End the operation with a stop condition.
Standby Mode:
- To minimize power consumption, ensure that the device is not actively communicating when not in use.
- The standby current is typically very low, but it can be further reduced by disconnecting the I2C lines when not needed.
Temperature Considerations:
- Operate the device within the specified temperature range to ensure reliable performance.
- Avoid exposing the device to extreme temperatures outside the operational limits.
Handling and Storage:
- Handle the device with care to avoid static damage.
- Store the device in a dry, cool environment to prevent moisture damage.
Data Retention:
- The device retains data for up to 400 years under normal operating conditions.
- Ensure the device is powered correctly to maintain data integrity.
Package Information:
- The 24LC16BT-I/OT is available in an 8-pin SOIC package.
- Follow the recommended PCB layout and soldering guidelines to ensure proper installation and reliability.
Compliance:
- Ensure that the device complies with all relevant safety and regulatory standards for your application.
Inquiry - 24LC16BT-I/OT
