Share:


YMU786-WZE7

Specifications

SKU: 11298814

BUY YMU786-WZE7 https://www.utsource.net/itm/p/11298814.html

Parameter Description
Part Number YMU786-WZE7
Type Surface Mount Device (SMD)
Package 0402 (1005 Metric)
Frequency Range 1.5 GHz to 3.0 GHz
Impedance 50 Ohms
VSWR ≤ 1.5:1
Insertion Loss ≤ 0.5 dB (Typical)
Return Loss ≥ 15 dB (Minimum)
Power Handling 1 W (Continuous Wave)
Temperature Range -40°C to +85°C
Operating Voltage DC 0V to 5V (Biasing)
Mounting Soldering
RoHS Compliance Yes

Instructions for Use

  1. Handling and Storage:

    • Store in a dry, cool place away from direct sunlight.
    • Handle with care to avoid mechanical damage.
  2. Soldering:

    • Preheat the PCB to 100°C to 120°C before soldering.
    • Use a soldering iron with a temperature setting of 300°C to 350°C.
    • Apply solder paste or flux to the pads.
    • Place the component on the PCB and reflow solder using standard SMD reflow profiles.
    • Ensure proper alignment and avoid excessive heat exposure.
  3. Biasing:

    • If biasing is required, apply a DC voltage between 0V and 5V as specified.
    • Use appropriate decoupling capacitors to filter out any noise.
  4. Testing:

    • After soldering, visually inspect the component for any solder bridges or misalignments.
    • Use a VNA (Vector Network Analyzer) to measure insertion loss, return loss, and VSWR.
    • Ensure that the measured parameters fall within the specified limits.
  5. Environmental Considerations:

    • The component is designed to operate within the specified temperature range.
    • Avoid exposing the component to extreme temperatures or humid conditions.
  6. Disposal:

    • Dispose of the component according to local environmental regulations.
    • Recycle where possible.
(For reference only)

 Inquiry - YMU786-WZE7