Share:
Specifications
SKU: 11300059
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | C1740 |
| Type | Capacitor | |
| Technology | Ceramic (X7R) | |
| Capacitance | Nominal Capacitance | 10 μF |
| Voltage Rating | Maximum DC Voltage | 50 V |
| Tolerance | Capacitance Tolerance | ±10% |
| Temperature Range | Operating Temperature Range | -55°C to +125°C |
| Case Size | Physical Dimensions | 1210 (3216 metric) |
| Termination | Lead Type | SMD (Surface Mount) |
| Insulation Resistance | Minimum Insulation Resistance at 25°C for 1 minute | 1000 MΩ |
| Dissipation Factor | Maximum Dissipation Factor at 1 kHz and 25°C | 2.0% |
| Operating Frequency | Frequency Range for Stable Performance | 10 Hz to 1 MHz |
| Mounting | Mounting Method | Soldering |
| Compliance | Standards Compliance | RoHS, REACH |
Instructions for Use
Handling and Storage:
- Store in a dry, cool place away from direct sunlight.
- Handle with care to avoid mechanical damage.
Soldering:
- Preheat the PCB to 100-120°C before soldering.
- Use a soldering iron with a temperature setting between 300-350°C.
- Apply solder to the pad and pin simultaneously, ensuring a good wetting action.
- Avoid overheating the component; the maximum soldering time should not exceed 3 seconds per connection.
Mounting:
- Place the capacitor on the PCB according to the polarity markings (if applicable).
- Ensure the component is securely attached to the PCB and aligned correctly.
Testing:
- After mounting, inspect the solder joints for any defects such as cold solder joints or bridges.
- Test the circuit to ensure the capacitor is functioning correctly within the specified parameters.
Environmental Considerations:
- Ensure the operating environment does not exceed the specified temperature range.
- Avoid exposing the component to corrosive gases or liquids.
Disposal:
- Dispose of the component in accordance with local environmental regulations.
Inquiry - C1740
