Share:
Specifications
SKU: 11303270
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.7 | - | 5.5 | V | |
| Standby Current | IDD | - | 10 | - | μA | @ VDD = 5V, Ta = 25°C |
| Operating Current | IDD | - | 20 | - | mA | @ VDD = 5V, Ta = 25°C, fCLK = 1MHz |
| Clock Frequency | fCLK | 0 | - | 20 | MHz | |
| Data Retention Time | tDR | - | 10 | - | years | @ VDD = 4.5V to 5.5V, Ta = 25°C |
| Write Cycle Time | tWC | - | 5 | - | ms | @ VDD = 4.5V to 5.5V, Ta = 25°C |
| Read Cycle Time | tRC | - | 120 | - | ns | @ VDD = 4.5V to 5.5V, Ta = 25°C, fCLK = 20MHz |
| Output High Voltage | VOH | - | VDD-0.4 | - | V | @ VDD = 4.5V to 5.5V, IOL = 4mA |
| Output Low Voltage | VOL | - | 0.4 | - | V | @ VDD = 4.5V to 5.5V, IOH = -4mA |
| Input High Voltage | VIH | - | VDD-1.0 | - | V | @ VDD = 4.5V to 5.5V |
| Input Low Voltage | VIL | - | 1.0 | - | V | @ VDD = 4.5V to 5.5V |
| Storage Temperature | Tstg | -40 | - | 85 | °C | |
| Operating Temperature | Topr | -40 | - | 85 | °C |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
- Avoid applying voltages outside this range to prevent damage to the device.
Clock Frequency:
- The device supports clock frequencies up to 20 MHz. Ensure the clock signal is stable and within the specified range.
Write Operations:
- A write cycle takes approximately 5 milliseconds. Do not perform any read or write operations during this time to avoid data corruption.
Read Operations:
- A read cycle takes approximately 120 nanoseconds. Ensure the system allows sufficient time for data to be read accurately.
Temperature Considerations:
- The device operates reliably within the temperature range of -40°C to 85°C. Store the device within the storage temperature range of -40°C to 85°C to maintain long-term reliability.
Input/Output Levels:
- Ensure that input signals meet the specified high (VIH) and low (VIL) voltage levels.
- Output signals will be within the specified high (VOH) and low (VOL) voltage levels.
Standby Mode:
- In standby mode, the device consumes approximately 10 μA. This mode is useful for power-sensitive applications.
Data Retention:
- The device retains data for up to 10 years under normal operating conditions. Regularly back up critical data to ensure data integrity.
Handling:
- Handle the device with care to avoid static discharge, which can damage the internal circuitry. Use proper ESD protection when handling the device.
Inquiry - 30EPF06
