Share:
Specifications
SKU: 11303371
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full Part Number | RTL8201F-VB-CG |
| Package Type | Package Form Factor | QFN-24 (6x6mm) |
| Operating Voltage | Supply Voltage Range | 3.0V to 3.6V |
| Operating Temperature | Operating Temperature Range | -40°C to 85°C |
| Data Rate | Maximum Data Rate | 10/100 Mbps |
| Interface | Ethernet Interface | 10/100BASE-TX |
| PHY Mode | Supported PHY Modes | 10BASE-T, 100BASE-TX |
| Power Consumption | Typical Power Consumption (100Mbps) | 350mW |
| Wake-on-LAN | Wake-on-LAN Support | Yes |
| LEDs | LED Indicators | Link/Activity, 100Mbps, Full/Half Duplex |
| ESD Protection | Human Body Model (HBM) ESD Protection | ±4kV |
| EMI Shielding | Integrated EMI Shielding | Yes |
| Compliance | Compliance Standards | IEEE 802.3, 802.3u, 802.3z, 802.3ab, 802.3af (PoE) |
| RoHS Compliance | RoHS Compliant | Yes |
| MTBF | Mean Time Between Failures | >1,000,000 hours |
Instructions for Use
Power Supply:
- Ensure the supply voltage is within the specified range (3.0V to 3.6V).
- Connect the VCC pin to the power supply and GND to ground.
Ethernet Connection:
- Connect the RJ45 connector to the appropriate pins on the PCB.
- Ensure proper termination resistors are used for signal integrity.
Configuration:
- The device supports auto-negotiation for 10/100BASE-TX modes.
- Use the configuration pins (if available) to set specific modes or features as required.
LED Configuration:
- Connect the LED pins to external LEDs to indicate link status, activity, and speed.
- Refer to the datasheet for specific pin connections and current requirements.
Power Management:
- The device supports low-power modes and wake-on-LAN functionality.
- Ensure the system can handle the wake-up signals if using these features.
EMI Considerations:
- Place the device away from high-interference areas.
- Use proper PCB layout techniques to minimize EMI, such as grounding planes and shielding.
Testing:
- After assembly, test the device with standard network equipment to ensure proper operation.
- Verify data rates, link stability, and compliance with standards.
Storage and Handling:
- Store the device in a dry, cool place to prevent moisture damage.
- Handle with care to avoid static discharge and physical damage.
For detailed information, refer to the official datasheet and application notes provided by Realtek.
(For reference only)Inquiry - RTL8201F-VB-CG
