Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 3V to 18V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Input Levels:

   • For a high input, the voltage should be at least 70% of V_CC.
   • For a low input, the voltage should be no more than 30% of V_CC.

3. Output Levels:

   • The output high voltage (V_OH) will be approximately V_CC - 0.5V.
   • The output low voltage (V_OL) will be around 0.5V.

4. Current Ratings:

   • The input current (I_IH and I_IL) should not exceed ±20μA.
   • The output current (I_OH and I_OL) should not exceed ±10mA.

5. Propagation Delay:

   • The typical propagation delay time (t_pd) is 35ns. This is the time it takes for the output to respond to a change in the input.

6. Power Dissipation:

   • The maximum power dissipation (P_D) is 100mW. Ensure proper heat sinking if operating near this limit.

7. Temperature Ranges:

   • The operating temperature range (T_A) is from -40°C to 85°C.
   • The storage temperature range (T_STG) is from -65°C to 150°C.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Use appropriate ESD protection when handling and soldering the device.

9. Soldering:

   • Use a temperature-controlled soldering iron and ensure that the soldering temperature does not exceed 300°C.
   • Solder each pin quickly to avoid thermal stress on the device.

10. Testing:

    • Before applying power, verify the correct orientation and connections of the device.
    • Use a multimeter to check for short circuits and open circuits before testing the device.

By following these guidelines, you can ensure reliable operation and longevity of the CD40174BE.