Instructions

1. Power On/Off:

   • Press the ON/OFF button to turn the multimeter on or off.

2. Function Selection:

   • Use the rotary switch to select the desired measurement function (e.g., DC voltage, AC voltage, resistance, etc.).

3. Range Selection:

   • For auto range, set the rotary switch to the "AUTO" position.
   • For manual range, select the appropriate range using the rotary switch.

4. Connecting Probes:

   • Insert the red probe into the "VΩmA" jack for voltage, resistance, continuity, diode test, and temperature measurements.
   • Insert the black probe into the "COM" jack.
   • For current measurements, insert the red probe into the "10A" jack for currents up to 10A.

5. Performing Measurements:

   • Place the probes across the component or circuit you want to measure.
   • Read the measurement on the LCD display.

6. Continuity Test:

   • Set the rotary switch to the continuity test position.
   • Touch the probes to the points you want to test. The multimeter will beep if the resistance is less than 50Ω.

7. Diode Test:

   • Set the rotary switch to the diode test position.
   • Connect the red probe to the anode and the black probe to the cathode of the diode. The multimeter will display the forward voltage drop.

8. Temperature Measurement:

   • Connect a K-type thermocouple to the "K" jack.
   • Set the rotary switch to the temperature measurement position.
   • Place the thermocouple in the area to be measured.

9. Battery Replacement:

   • Turn off the multimeter.
   • Remove the battery cover located on the back of the multimeter.
   • Replace the 9V battery.
   • Reattach the battery cover.

10. Maintenance:

    • Keep the multimeter clean and dry.
    • Store in a cool, dry place when not in use.
    • Do not expose to extreme temperatures or humidity.
    • Periodically check the probes and leads for damage and replace if necessary.

For more detailed information, refer to the user manual provided with the K2700 multimeter.