Share:
Specifications
SKU: 11303461
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Forward Voltage | VF | - | 1.45 | 2.1 | V | Voltage at 20 mA forward current |
| Reverse Current | IR | - | - | 100 | μA | Reverse leakage current at 60V |
| Peak Forward Current | IF(surge) | - | - | 100 | mA | Maximum peak forward current (10 ms) |
| Continuous Forward Current | IF | - | 20 | - | mA | Continuous forward current |
| Reverse Breakdown Voltage | VBR | 60 | - | - | V | Minimum reverse breakdown voltage |
| Operating Temperature | Top | -40 | - | 100 | °C | Operating temperature range |
| Storage Temperature | Tstg | -40 | - | 150 | °C | Storage temperature range |
| Forward Power Dissipation | PF | - | 100 | - | mW | Maximum power dissipation at 25°C |
Instructions for Use:
Mounting:
- Ensure the diode is mounted on a PCB with adequate clearance to prevent short circuits.
- Use appropriate soldering techniques to avoid overheating the component.
Forward Current:
- Do not exceed the continuous forward current (IF) of 20 mA to prevent damage.
- For applications requiring higher currents, use the peak forward current (IF(surge)) rating, but ensure it does not exceed 100 mA for more than 10 ms.
Reverse Voltage:
- The diode is rated for a minimum reverse breakdown voltage (VBR) of 60V. Ensure that the reverse voltage applied does not exceed this value to avoid breakdown.
Temperature:
- Operate the diode within the specified operating temperature range (-40°C to 100°C).
- Store the diode within the storage temperature range (-40°C to 150°C).
Power Dissipation:
- The maximum forward power dissipation (PF) is 100 mW at 25°C. Ensure adequate heat sinking if operating near this limit.
Handling:
- Handle the diode with care to avoid mechanical damage.
- Use proper ESD protection when handling to prevent electrostatic discharge damage.
Testing:
- Test the diode using a multimeter or diode tester to ensure it is functioning correctly before installation.
- Verify the forward and reverse characteristics as per the specifications provided.
Schematic Design:
- Ensure the diode is correctly oriented in the circuit to prevent reverse polarity issues.
- Use the correct footprint and pinout as specified in the datasheet.
Compliance:
- Ensure the diode meets any relevant safety and compliance standards for your application.
By following these instructions, you can ensure the reliable and safe operation of the D06G60C diode in your electronic designs.
(For reference only)Inquiry - D06G60C
