Instructions for Use:

1. Mounting:

   • Ensure the capacitor is mounted on a flat surface.
   • Use standard soldering techniques suitable for surface mount components.
   • Avoid excessive heat during soldering to prevent damage.

2. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect against static discharge.

3. Handling:

   • Handle with care to avoid mechanical stress.
   • Do not apply excessive force when placing or removing the component.

4. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should be kept to a minimum, typically less than 3 seconds per pad.

5. Inspection:

   • Visually inspect the component after soldering to ensure proper alignment and solder joints.
   • Use a multimeter to check for short circuits or open circuits.

6. Testing:

   • Test the circuit to ensure the capacitor is functioning correctly.
   • Measure the capacitance using a capacitance meter if available.

7. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle whenever possible to minimize environmental impact.