Share:
Specifications
SKU: 11304200
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Drain-Source Voltage | VDS | - | - | 400 | V | |
| Gate-Source Voltage | VGS | -15 | - | 15 | V | |
| Continuous Drain Current | ID | - | - | 5.0 | A | @ TA = 25°C, VGS = 10V |
| Pulse Drain Current | ID(p) | - | - | 12 | A | @ TC = 25°C, tp = 10μs, Duty Cycle = 1% |
| Power Dissipation | PTOT | - | - | 28 | W | @ TC = 25°C |
| Junction Temperature | TJ | - | - | 150 | °C | |
| Storage Temperature | TSTG | -65 | - | 150 | °C | |
| Gate Charge | QG | - | 37 | - | nC | @ VDS = 300V, ID = 5A, VGS = 10V |
| Input Capacitance | Ciss | - | 1500 | - | pF | @ VDS = 300V, f = 1MHz |
| Output Capacitance | Coss | - | 300 | - | pF | @ VDS = 300V, f = 1MHz |
| Reverse Transfer Capacitance | Crss | - | 150 | - | pF | @ VDS = 300V, f = 1MHz |
| On-State Resistance | RDS(on) | - | 0.12 | - | Ω | @ VGS = 10V, ID = 5A |
| Threshold Voltage | VGS(th) | 1.0 | 2.0 | 3.0 | V | @ ID = 250μA |
| Maximum Gate Current | IGM | - | - | 1.0 | A |
Instructions for Use:
Handling and Storage:
- Store the device in a dry, cool place to prevent moisture damage.
- Handle with care to avoid static discharge, which can damage the device.
Mounting:
- Ensure proper thermal management by using a heatsink if necessary to keep the junction temperature within the specified limits.
- Use appropriate mounting hardware to secure the device and ensure good thermal contact.
Electrical Connections:
- Connect the drain (D), source (S), and gate (G) terminals correctly.
- Ensure that the gate drive circuit provides the required voltage levels for reliable operation.
Operating Conditions:
- Do not exceed the maximum ratings for drain-source voltage, gate-source voltage, and continuous or pulse drain current.
- Monitor the power dissipation and junction temperature to avoid overheating.
Testing:
- Perform initial testing at room temperature to verify correct operation.
- Gradually increase the load and environmental conditions to ensure the device operates within its specifications.
Safety Precautions:
- Use appropriate safety equipment when handling high voltages.
- Follow all relevant electrical safety guidelines and regulations.
Inquiry - PMEG4005AEA
