Instructions for Use

1. Soldering:

   • Use a soldering iron with a temperature setting of 350°C to 400°C.
   • Apply solder to the pads and the component leads, ensuring a good mechanical and electrical connection.
   • Avoid excessive heat exposure to prevent damage to the component.

2. Storage:

   • Store in a dry, cool place to prevent moisture absorption.
   • Keep away from direct sunlight and sources of high heat.

3. Handling:

   • Handle with care to avoid mechanical stress or damage.
   • Use appropriate ESD (Electrostatic Discharge) protection measures.

4. Mounting:

   • Ensure the PCB (Printed Circuit Board) is clean and free of contaminants.
   • Place the component on the PCB with the correct orientation.
   • Use a reflow soldering process if using automated assembly equipment.

5. Testing:

   • After soldering, inspect the joints for proper alignment and quality.
   • Use a multimeter to check for continuity and resistance values.
   • Verify the inductance value using an LCR meter or similar testing equipment.

6. Application:

   • Suitable for use in power supply circuits, filtering applications, and signal conditioning.
   • Ensure the operating conditions (voltage, current, frequency) are within the specified limits.

7. Safety:

   • Follow all safety guidelines and regulations when handling and using electronic components.
   • Dispose of any damaged or unused components in an environmentally responsible manner.