Share:
Specifications
SKU: 11526487
| Parameter | Description | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| VDS | Drain-Source Voltage | - | 30 | - | V |
| VGS | Gate-Source Voltage | -10 | 0 | 10 | V |
| ID | Continuous Drain Current | - | 2.5 | - | A |
| PD | Total Power Dissipation | - | 30 | - | W |
| RDS(on) | On-State Resistance at VGS = 10V | - | 0.045 | - | Ω |
| VGS(th) | Gate-Source Threshold Voltage | 2.0 | 4.0 | 6.0 | V |
| fSW | Switching Frequency | - | 500 | - | kHz |
| QG | Total Gate Charge | - | 70 | - | nC |
| QGD | Gate-Drain Charge | - | 20 | - | nC |
| td(on) | Turn-On Delay Time | - | 25 | - | ns |
| tr | Rise Time | - | 20 | - | ns |
| td(off) | Turn-Off Delay Time | - | 25 | - | ns |
| tf | Fall Time | - | 20 | - | ns |
Instructions for Use:
Mounting and Handling:
- Handle the device with care to avoid damage.
- Ensure proper heat sinking if operating near maximum power dissipation.
Biasing:
- Apply gate-source voltage (VGS) within the specified range to control the drain current (ID).
- Ensure VGS does not exceed the maximum rating to prevent damage.
Thermal Management:
- Monitor the junction temperature (TJ) to ensure it stays within safe limits.
- Use appropriate heatsinks or cooling solutions for high-power applications.
Switching:
- For optimal switching performance, keep the switching frequency (fSW) within the recommended range.
- Minimize gate resistance to reduce switching losses.
Storage and Operating Conditions:
- Store the device in a dry, cool environment.
- Operate the device within the specified temperature range to ensure reliable performance.
Testing:
- Use appropriate test equipment and procedures to measure parameters such as RDS(on), VGS(th), and switching times.
- Ensure test conditions match the specified conditions in the datasheet for accurate results.
Inquiry - 06N90E
