Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Avoid exposure to excessive heat, humidity, and corrosive environments.

2. Soldering:

   • Preheat components to 70-90°C before soldering.
   • Soldering temperature should not exceed 350°C.
   • Soldering time should not exceed 3 seconds per joint.

3. Mounting:

   • Ensure proper alignment and secure mounting on the PCB.
   • Use appropriate clamps or fixtures to hold the resistor in place during soldering.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Recommended storage temperature: -10 to +40°C.

5. Testing:

   • Use a multimeter to verify resistance value before installation.
   • Ensure the circuit is powered off during testing to prevent damage.

6. Compliance:

   • Check for compliance with relevant standards and regulations (e.g., RoHS, REACH).

7. Disposal:

   • Dispose of the resistor according to local environmental regulations.