Share:
Specifications
SKU: 11527543
| Parameter | Symbol | Min | Typical | Max | Unit | Condition |
|---|---|---|---|---|---|---|
| Drain-Source Voltage | VDS | - | 600 | - | V | - |
| Gate-Source Voltage | VGS | -15 | 0 | 20 | V | - |
| Continuous Drain Current | ID | - | 43 | - | A | TC = 25°C |
| Continuous Drain Current | ID | - | 30 | - | A | TC = 100°C |
| Pulse Drain Current | IDpeak | - | 129 | - | A | tp = 10 μs, Duty Cycle = 1% |
| Power Dissipation | PTOT | - | 280 | - | W | TC = 25°C |
| Junction Temperature | TJ | -55 | - | 175 | °C | - |
| Storage Temperature | TSTG | -55 | - | 175 | °C | - |
| Thermal Resistance (Junction to Case) | Rth(j-c) | - | 0.3 | - | °C/W | - |
| Total Gate Charge | QG | - | 70 | - | nC | VGS = 15 V |
| Input Capacitance | Ciss | - | 2600 | - | pF | VDS = 600 V |
| Output Capacitance | Coss | - | 250 | - | pF | VDS = 600 V |
| Reverse Transfer Capacitance | Crss | - | 350 | - | pF | VDS = 600 V |
| Turn-on Delay Time | td(on) | - | 45 | - | ns | ID = 20 A, VGS = 15 V |
| Rise Time | tr | - | 30 | - | ns | ID = 20 A, VGS = 15 V |
| Turn-off Delay Time | td(off) | - | 25 | - | ns | ID = 20 A, VGS = 15 V |
| Fall Time | tf | - | 20 | - | ns | ID = 20 A, VGS = 15 V |
Instructions for Use:
Handling Precautions:
- Handle with care to avoid damage to the device.
- Use ESD (Electrostatic Discharge) protection when handling the device.
Mounting:
- Ensure proper thermal management to keep the junction temperature within the specified range.
- Use a heatsink if necessary to dissipate heat effectively.
Biasing:
- Apply the gate-source voltage (VGS) within the specified limits to avoid damaging the device.
- Ensure the gate drive circuitry is capable of providing the required current to charge and discharge the gate capacitance quickly.
Operation:
- Operate the device within the continuous drain current (ID) ratings to prevent overheating.
- For pulse applications, ensure the pulse duration and duty cycle are within the specified limits to avoid exceeding the maximum power dissipation.
Testing:
- Perform all tests under controlled conditions to ensure accurate results.
- Refer to the datasheet for specific test conditions and procedures.
Storage:
- Store the device in a dry, cool place away from direct sunlight and sources of heat.
- Keep the device in its original packaging until ready for use to protect against static and physical damage.
Safety:
- Follow all safety guidelines and regulations when working with high voltages and currents.
- Use appropriate personal protective equipment (PPE) as needed.
For detailed information and additional specifications, refer to the official STMicroelectronics datasheet for the STW43NM60ND.
(For reference only)Inquiry - STW43NM60ND
