Instructions for Use:

1. Handling:

   • Handle with care to avoid damage to the diode.
   • Use appropriate ESD (Electrostatic Discharge) precautions.

2. Soldering:

   • Preheat the board to 100°C to 150°C.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should be limited to 10 seconds.

3. Mounting:

   • Ensure the diode is placed correctly on the PCB according to the polarity markings.
   • Apply sufficient pressure to ensure good contact between the diode and the PCB.

4. Storage:

   • Store in a dry, cool place.
   • Avoid exposure to high humidity and extreme temperatures.

5. Testing:

   • Use a multimeter to test the diode before installation.
   • Ensure the diode is not shorted or open.

6. Circuit Design:

   • Ensure the circuit design does not exceed the maximum power dissipation and operating temperature range.
   • Use appropriate heat sinks if necessary to manage thermal dissipation.

7. Compliance:

   • Ensure compliance with all relevant safety and regulatory standards.