Share:
Specifications
SKU: 11531294
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | RP1E070XNFPFTCR |
| Manufacturer | Manufacturer | Vishay |
| Series | Series name | RP1E |
| Type | Type of component | Power MOSFET |
| Package | Package type | TO-263 (D2PAK) |
| Polarity | Polarity | N-Channel |
| VDSS | Drain-to-source voltage | 70 V |
| RDS(on) | On-state resistance at VGS=10V | 4.5 mΩ |
| ID | Continuous drain current | 80 A |
| Power Dissipation | Maximum power dissipation | 150 W |
| Operating Temperature | Operating temperature range | -55°C to +175°C |
| Storage Temperature | Storage temperature range | -65°C to +150°C |
| Gate Charge | Total gate charge | 119 nC |
| Input Capacitance | Input capacitance at VDS=10V, f=1MHz | 2200 pF |
| Output Capacitance | Output capacitance at VDS=10V, f=1MHz | 1000 pF |
| Reverse Transfer Capacitance | Reverse transfer capacitance at VDS=10V, f=1MHz | 300 pF |
| Thermal Resistance | Junction-to-case thermal resistance | 0.45°C/W |
| Thermal Resistance | Junction-to-ambient thermal resistance | 35°C/W |
| Lead Finish | Lead finish | Matte Tin |
| RoHS Compliance | RoHS compliance | Yes |
Instructions for Use:
Handling and Storage:
- Store in a dry, cool place to prevent moisture damage.
- Handle with care to avoid damaging the leads and the package.
Mounting:
- Ensure proper heat sinking to manage thermal resistance.
- Use recommended torque values for screw terminals to avoid over-tightening and damage.
Electrical Connections:
- Connect the drain, source, and gate terminals correctly to avoid short circuits.
- Use appropriate wire gauges to handle the current ratings.
Operational Considerations:
- Ensure that the operating voltage does not exceed the rated VDSS.
- Keep the operating temperature within the specified range to avoid thermal runaway.
- Use gate resistors to control switching speed and reduce EMI.
Testing:
- Use a multimeter or an oscilloscope to verify the correct operation and connections.
- Perform initial testing under controlled conditions to ensure safe operation.
Safety:
- Always follow safety guidelines when working with high-voltage and high-current circuits.
- Use protective equipment such as gloves and goggles when handling the component.
For more detailed information, refer to the datasheet provided by the manufacturer.
(For reference only)Inquiry - RP1E070XNFPFTCR
