Share:
Specifications
SKU: 11532546
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number of the component | FMA9A |
| Type | Type of component | Surface Mount |
| Package | Package type | SOT-23 |
| Function | Function of the component | Analog Switch |
| Supply Voltage | Operating supply voltage range | 1.8V to 5.5V |
| Current | Maximum supply current | 100 μA |
| Bandwidth | Signal bandwidth | 10 MHz |
| On Resistance | Maximum on-state resistance | 1.5 Ω |
| Off Isolation | Minimum off-state isolation | 60 dB |
| Input Voltage | Maximum input voltage | ±0.5V beyond Vcc |
| Operating Temp | Operating temperature range | -40°C to 85°C |
| Storage Temp | Storage temperature range | -65°C to 150°C |
| Lead Finish | Lead finish material | Tin |
| RoHS Compliant | Compliance with RoHS standards | Yes |
Instructions for Use:
Power Supply:
- Ensure the supply voltage is within the specified range (1.8V to 5.5V).
- Connect the power supply to the Vcc and GND pins.
Signal Input/Output:
- Connect the signal source to the input pin (IN) and the load to the output pin (OUT).
Control Signal:
- Apply a control signal to the control pin (CTRL) to switch the analog switch on or off.
- For ON state, apply a high logic level (Vcc).
- For OFF state, apply a low logic level (GND).
Thermal Management:
- Ensure adequate heat dissipation if operating at high temperatures or high currents.
- Use a heatsink if necessary.
Handling:
- Handle the component with care to avoid damage to the leads and package.
- Follow ESD (Electrostatic Discharge) precautions to prevent damage.
Mounting:
- Solder the component to the PCB using standard SMT soldering techniques.
- Ensure proper alignment and soldering to avoid shorts or open circuits.
Testing:
- After mounting, test the functionality by applying a known signal and measuring the output.
- Verify the on and off states by checking the continuity between the input and output pins.
Inquiry - FMA9A
