Instructions for Use:

1. Handling:

   • Handle the CXT5401TR with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection when handling the component.

2. Mounting:

   • Ensure the PCB (Printed Circuit Board) is clean and free from contaminants.
   • Place the capacitor on the PCB according to the silkscreen markings.
   • Apply solder paste or flux to the pads before placing the component.
   • Use a reflow soldering process with a suitable temperature profile to ensure proper soldering.

3. Soldering:

   • Preheat the PCB to the recommended temperature.
   • Use a soldering iron or reflow oven to melt the solder and form a good joint.
   • Avoid overheating the component, as this can cause damage.

4. Inspection:

   • Visually inspect the solder joints to ensure they are smooth, shiny, and free from voids or bridges.
   • Use a multimeter to check for short circuits or open circuits.

5. Testing:

   • Test the assembled PCB to ensure the capacitor is functioning correctly.
   • Measure the capacitance using a capacitance meter to verify it falls within the specified tolerance.

6. Storage:

   • Store the CXT5401TR in a dry, cool place to prevent moisture damage.
   • Keep the components in their original packaging until ready for use.

7. Disposal:

   • Dispose of any defective or unused components in accordance with local environmental regulations.