Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Avoid exposure to high temperatures and humidity.

2. Mounting:

   • Ensure proper alignment during mounting to avoid misalignment and potential damage.
   • Use appropriate soldering techniques and temperatures to prevent thermal shock.

3. Soldering:

   • Preheat the board to 120°C ± 10°C before soldering.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should be kept to a minimum, typically no more than 10 seconds per joint.

4. Electrical Connections:

   • Ensure that the diode is connected correctly according to the circuit diagram.
   • The cathode (K) and anode (A) must be identified correctly to avoid reverse polarity issues.

5. Thermal Management:

   • If the diode will operate at high current levels, consider using a heatsink to dissipate heat effectively.
   • Monitor the junction temperature to ensure it stays within the specified operating range.

6. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage.

7. Testing:

   • Use a multimeter to check for continuity and ensure the diode is functioning correctly.
   • Perform functional tests as per the application requirements.

8. Compliance:

   • Ensure compliance with all relevant safety and regulatory standards for the intended application.

Package Information:

• Package Type: DO214AB (SMCJ)
• Dimensions:
  • Length: 6.0 mm
  • Width: 3.1 mm
  • Height: 1.1 mm

Marking:

• The diode may be marked with a band or dot to indicate the cathode side. Refer to the datasheet for specific marking details.