Instructions for Use:

1. Handling:

   • Handle with care to avoid damage to the leads or body.
   • Do not apply excessive force when bending the leads.

2. Mounting:

   • Ensure the leads are bent at a distance of at least 1.5mm from the body to prevent mechanical stress.
   • Solder the component within 30 seconds at a temperature not exceeding 260°C.
   • Allow the solder joints to cool naturally without applying additional stress.

3. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Avoid exposure to high humidity and corrosive environments.

4. Operating Conditions:

   • Operate within the specified temperature range to ensure reliable performance.
   • Do not exceed the maximum voltage rating to prevent breakdown.

5. Testing:

   • Use a capacitance meter to verify the capacitance value before installation.
   • Ensure the testing equipment is calibrated to provide accurate readings.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle where possible to minimize environmental impact.