Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the range of 1.65V to 5.5V.
   • Connect the positive supply to the VCC pin and the negative supply to the GND pin.

2. Signal Input:

   • Apply the input signal to the IN pin. The maximum input current should not exceed 10mA.

3. Signal Output:

   • The output signal will be available at the OUT pin. The maximum output current should not exceed 10mA.

4. Isolation:

   • The device provides 5000Vrms isolation between the input and output circuits. Ensure that the isolation requirements are met for your application.

5. Temperature Considerations:

   • The operating temperature range is from -40°C to +125°C. Store the device in an environment with temperatures ranging from -65°C to +150°C.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling and installing the device.

7. Mounting:

   • Solder the device using standard SMT (Surface Mount Technology) techniques.
   • Ensure proper alignment and soldering to avoid mechanical stress on the pins.

8. Testing:

   • After installation, test the device to ensure it meets the specified performance parameters.
   • Verify the propagation delay and bandwidth to confirm proper operation.