Instructions for DS1743E-3

1. Power Supply:

   • Ensure the operating voltage (Vcc) is within the range of 2.0V to 5.5V.
   • The typical supply current in active mode is 300 μA, and in shutdown mode, it is 1 μA.

2. Output Configuration:

   • The output voltage (Vout) is typically 3.3V.
   • The maximum output current (Iout) is 100 mA.

3. Temperature Considerations:

   • The device operates over a temperature range from -40°C to 85°C.

4. Shutdown Operation:

   • To enter shutdown mode, apply a low signal to the shutdown pin.
   • The typical shutdown time (tSHD) is 50 μs.

5. Rise and Fall Times:

   • The typical rise time (tr) and fall time (tf) are both 10 μs.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry environment to prevent moisture damage.

7. Soldering:

   • Use a soldering iron with a temperature not exceeding 300°C.
   • Ensure the soldering process is completed within 10 seconds per joint.

8. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure proper functionality.

9. Compliance:

   • Ensure the device complies with all relevant safety and regulatory standards.

10. Application Notes:

    • Refer to the datasheet for detailed application notes and circuit diagrams to optimize performance in your specific application.