Instructions for Use:

1. Soldering:

   • Use a temperature-controlled soldering iron set to a maximum of 300°C.
   • Ensure that the soldering time does not exceed 3 seconds per joint.
   • Avoid excessive thermal shock during soldering.

2. Handling:

   • Handle with care to avoid mechanical stress or damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage.

3. Mounting:

   • Place the resistor on the PCB (Printed Circuit Board) according to the design layout.
   • Ensure that the resistor is aligned correctly before soldering.

4. Storage:

   • Store in a dry, cool place to prevent moisture absorption.
   • Keep away from direct sunlight and sources of heat.

5. Inspection:

   • After soldering, inspect the joints for proper wetting and absence of voids or cold solder joints.
   • Verify that the resistor is securely attached to the PCB.

6. Testing:

   • Use a multimeter to verify the resistance value and ensure it falls within the specified tolerance range.
   • Perform functional testing as part of the overall circuit verification.