Share:
Specifications
SKU: 11539099
| Parameter | Description | Value |
|---|---|---|
| Device Type | Complex Programmable Logic Device (CPLD) | EPM7064AETC44-7N |
| Package | TQFP (Thin Quad Flat Package) | 44-Pin |
| Operating Voltage (Vcc) | Supply Voltage | 3.3V |
| I/O Voltage (VccIO) | Input/Output Voltage | 3.3V |
| Configuration Voltage (VccP) | Configuration Voltage | 3.3V |
| Number of Logic Cells | Total number of logic cells | 640 |
| Macrocells | Number of macrocells | 64 |
| Flip-Flops | Number of flip-flops | 640 |
| I/O Pins | Number of I/O pins | 32 |
| Internal RAM (bits) | Internal RAM bits | 512 |
| Maximum Clock Frequency | Maximum clock frequency | 188 MHz |
| Configuration Method | Configuration method | Serial In-System |
| Configuration Time | Time to configure the device | 2 ms |
| Operating Temperature | Operating temperature range | -40°C to +85°C |
| Storage Temperature | Storage temperature range | -65°C to +150°C |
| Power Consumption | Typical power consumption | 150 mW |
| Package Size | Dimensions of the package | 7 x 7 mm |
| Lead Pitch | Distance between the centers of adjacent leads | 0.5 mm |
Instructions for Use
Power Supply:
- Ensure that the Vcc, VccIO, and VccP are all connected to 3.3V.
- Connect the ground (GND) pins to a stable ground reference.
Configuration:
- Use the serial in-system programming (ISP) method to configure the device.
- Ensure the configuration data is correctly loaded using the appropriate programming software and hardware.
I/O Handling:
- Configure the I/O pins as inputs or outputs according to your application requirements.
- Use pull-up or pull-down resistors as needed for input pins.
Clocking:
- Connect the clock signal to the appropriate clock input pin.
- Ensure the clock signal meets the maximum clock frequency specification.
Thermal Management:
- Ensure adequate cooling if the device is operating at high temperatures or high power consumption levels.
- Follow the recommended PCB layout guidelines to optimize thermal performance.
Storage and Handling:
- Store the device in a dry, cool place within the specified storage temperature range.
- Handle the device with care to avoid damage to the pins and package.
Testing:
- After configuration, test the device to ensure it functions as expected.
- Use boundary-scan testing if available to verify the integrity of the device and connections.
For detailed specifications and additional information, refer to the datasheet provided by the manufacturer.
(For reference only)Inquiry - EPM7064AETC44-7N
