Share:
Specifications
SKU: 11540386
| Parameter | Description | Value |
|---|---|---|
| Device Type | Type of device | CPLD (Complex Programmable Logic Device) |
| Family | Device family | MAX II |
| Part Number | Specific part number | EPM240T100I5N |
| Package | Package type | TQFP-100 |
| Speed Grade | Speed grade | -5 (ns) |
| I/O Pins | Number of I/O pins | 96 |
| Logic Cells | Number of logic cells | 240 |
| Internal RAM | Internal RAM size | 1,280 bits |
| Max Operating Temperature | Maximum operating temperature | +85°C |
| Min Operating Temperature | Minimum operating temperature | -40°C |
| Supply Voltage (Vcc) | Supply voltage range | 2.3V to 3.6V |
| Standby Current | Standby current | 1 μA (typical) |
| Active Power Consumption | Active power consumption | 1 mW/MHz (typical) |
| Configuration Modes | Supported configuration modes | Active Serial, Passive Serial, JTAG, AS, PS |
| Programming Voltage | Programming voltage | 3.3V |
| Configuration Memory | Configuration memory type | Non-volatile flash memory |
| ESD Protection | ESD protection level | HBM: 2000V, MM: 200V |
| Operating Frequency | Maximum operating frequency | 200 MHz |
| Clock Inputs | Number of clock inputs | 4 |
| Global Set/Reset | Global set/reset signals | 2 |
| Power-down Mode | Power-down mode support | Yes |
| JTAG Boundary Scan | JTAG boundary scan support | Yes |
| Package Pinout | Package pinout diagram | Refer to datasheet for detailed pinout |
Instructions for Use:
Power Supply:
- Ensure that the supply voltage (Vcc) is within the specified range of 2.3V to 3.6V.
- Connect the ground (GND) pin to a stable ground reference.
Configuration:
- Use one of the supported configuration modes (Active Serial, Passive Serial, JTAG, AS, PS) to program the device.
- For non-volatile configuration, use the on-chip flash memory.
Clocking:
- Connect external clocks to the clock input pins (CLK0, CLK1, CLK2, CLK3).
- Ensure that the clock signals are clean and within the maximum operating frequency of 200 MHz.
I/O Handling:
- Configure the I/O pins as inputs or outputs as required by your application.
- Use the global set/reset signals for synchronous control.
Power Management:
- Utilize the power-down mode to reduce power consumption when the device is not in use.
- Ensure that the standby current is within acceptable limits during idle periods.
ESD Protection:
- Handle the device with care to avoid ESD damage.
- Follow proper ESD handling procedures and use appropriate grounding techniques.
Testing and Debugging:
- Use JTAG boundary scan for testing and debugging purposes.
- Verify the configuration and functionality using the provided development tools and software.
Environmental Considerations:
- Operate the device within the specified temperature range of -40°C to +85°C.
- Store the device in a dry, cool environment to prevent damage.
For more detailed information, refer to the official datasheet and application notes provided by the manufacturer.
(For reference only)Inquiry - EPM240T100I5N
