Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.0V to 5.5V.
   • Connect the ground (GND) pin to a stable reference ground.

2. Input Signals:

   • Apply input signals to the data input (D) and clock (CLK) pins.
   • The input high voltage (VIH) should be between 2.0V and 5.5V.
   • The input low voltage (VIL) should be between 0.0V and 0.8V.

3. Output Signals:

   • The output high current (IOH) is -10mA, and the output low current (IOL) is 10mA.
   • Connect the output pins to the desired load or subsequent logic circuits.

4. Propagation Delay:

   • The typical propagation delay time (tPD) is 10ns, which is the time it takes for a change in the input signal to affect the output.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C for optimal performance.
   • Store the device in a temperature range of -65°C to 150°C.

6. Handling:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Follow proper soldering techniques to ensure reliable connections.

7. Testing:

   • Test the device under controlled conditions to verify its functionality before integrating it into a larger system.