Share:
Specifications
SKU: 11544145
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.7 | 5.0 | 5.5 | V | |
| Operating Temperature | Toper | -40 | 125 | °C | ||
| Storage Temperature | Tstg | -40 | 150 | °C | ||
| Output Type | Push-Pull | |||||
| Output Current (High) | IoutH | 10 | 20 | mA | Maximum output current when high | |
| Output Current (Low) | IoutL | 0.1 | 0.5 | mA | Leakage current when low | |
| Sensitivity | S | 0.1 | 1.0 | 10 | mV/mT | Adjustable via configuration |
| Measurement Range | Bmin | -10 | +10 | mT | Magnetic field range | |
| Resolution | 12 | bits | Digital output resolution | |||
| Communication Interface | SPI | Supports standard SPI communication protocol | ||||
| Power Consumption | IDD | 20 | 30 | μA | Typical power consumption in active mode | |
| Sleep Mode Current | IDDsleep | 0.5 | 1.0 | μA | Power consumption in sleep mode | |
| Wake-up Time | Twake | 5 | 10 | μs | Time to wake from sleep mode | |
| Response Time | Tr | 50 | 100 | μs | Time to provide a valid output after a measurement command | |
| Mechanical Dimensions | L x W x H | 4.9 | 3.0 | 1.0 | mm | Length, Width, Height |
| Package Type | DFN | 8-pin leaded | Dual Flat No-lead package |
Instructions for Use
Power Supply:
- Connect the VDD pin to a supply voltage between 2.7V and 5.5V.
- Ensure the supply voltage is stable and within the specified range to avoid damage or erratic behavior.
Ground Connection:
- Connect the GND pin to the system ground to ensure proper operation and noise immunity.
Communication:
- The MLX90360 supports SPI communication. Connect the SPI pins (MISO, MOSI, SCK, CS) to the corresponding pins on your microcontroller or processor.
- Ensure the SPI clock frequency does not exceed the maximum supported by the device.
Configuration:
- Use the SPI interface to configure the sensitivity, measurement range, and other parameters as needed.
- Refer to the device datasheet for specific configuration commands and register settings.
Measurement:
- Send a measurement command via SPI to initiate a magnetic field measurement.
- The device will provide the measured magnetic field data in digital format through the SPI interface.
Sleep Mode:
- To reduce power consumption, the device can be put into sleep mode by sending a specific command via SPI.
- Wake up the device by sending a wake-up command or by toggling the CS pin.
Handling and Storage:
- Store the device in a dry, temperature-controlled environment to prevent damage.
- Handle with care to avoid mechanical stress or static discharge.
Mounting:
- Mount the device on a PCB using standard surface mount technology (SMT) processes.
- Ensure the PCB layout provides adequate thermal dissipation if operating at high temperatures.
For detailed information and advanced configurations, refer to the official MLX90360 datasheet and application notes provided by Melexis.
(For reference only)Inquiry - MLX90360LDC-ACD-000-RE
