Share:
Specifications
SKU: 11546349
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.0 | - | 6.0 | V | - |
| Input Low Voltage | VIL | -0.5 | - | 0.8 | V | VCC = 4.5V to 5.5V |
| Input High Voltage | VIH | 2.0 | - | 5.5 | V | VCC = 4.5V to 5.5V |
| Output Low Voltage | VOL | 0.0 | - | 0.1 | V | IOL = 25mA, VCC = 4.5V to 5.5V |
| Output High Voltage | VOH | 2.7 | - | VCC - 0.2 | V | IOH = -25mA, VCC = 4.5V to 5.5V |
| Propagation Delay Time (Low to High) | tPLH | - | 8 | - | ns | VCC = 5V, VOH = 3.5V, VOL = 1.5V, CL = 50pF |
| Propagation Delay Time (High to Low) | tPHL | - | 8 | - | ns | VCC = 5V, VOH = 3.5V, VOL = 1.5V, CL = 50pF |
| Power Dissipation | PD | - | - | 500 | mW | Per Package |
| Operating Temperature Range | TA | -40 | - | 85 | °C | - |
| Storage Temperature Range | TSTG | -65 | - | 150 | °C | - |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 2.0V to 6.0V.
- Connect VCC to the positive power supply and GND to the ground.
Input Signals:
- For valid low input (VIL), ensure the voltage is between -0.5V and 0.8V.
- For valid high input (VIH), ensure the voltage is between 2.0V and 5.5V.
Output Signals:
- When the output is low (VOL), the voltage should be between 0.0V and 0.1V.
- When the output is high (VOH), the voltage should be between 2.7V and VCC - 0.2V.
Propagation Delay:
- The propagation delay time (tPLH and tPHL) is typically 8ns under standard conditions (VCC = 5V, VOH = 3.5V, VOL = 1.5V, CL = 50pF).
Power Dissipation:
- The maximum power dissipation per package is 500mW. Ensure proper heat dissipation if operating near this limit.
Temperature Ranges:
- The operating temperature range is from -40°C to 85°C.
- The storage temperature range is from -65°C to 150°C.
Handling:
- Handle the device with care to avoid static damage.
- Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.
Mounting:
- Ensure the device is securely mounted on the PCB with appropriate soldering techniques.
- Verify that all connections are correct and secure before powering the circuit.
Testing:
- Test the device under typical operating conditions to ensure it meets the specified performance parameters.
- Use a multimeter or oscilloscope to verify input and output voltages and timing characteristics.
Inquiry - UPD74HC541GS
