Instructions for Use:

1. Power Supply Connection:

   • Connect the input voltage (Vcc) to the VIN pin.
   • Connect the output voltage (Vout) to the VOUT pin.
   • Ensure that the input voltage is within the specified range (8.5 to 75V).

2. Ground Connection:

   • Connect the GND pin to a common ground.

3. Capacitors:

   • Place a 1μF ceramic capacitor between the VIN and GND pins as close as possible to the device.
   • Place a 10μF electrolytic capacitor between the VOUT and GND pins to stabilize the output.

4. Thermal Considerations:

   • Ensure adequate heat dissipation, especially when operating at high output currents or in high ambient temperatures.
   • If necessary, use a heatsink or PCB copper pour to improve thermal performance.

5. Protection:

   • The device includes overcurrent and overtemperature protection. However, ensure that the device does not operate continuously under fault conditions to prevent damage.

6. Storage and Handling:

   • Store the device in a dry, cool environment within the specified storage temperature range (-65 to 150°C).
   • Handle with care to avoid static discharge, which can damage the device.

7. Mounting:

   • Follow standard SOT-23-6 package mounting guidelines to ensure proper soldering and mechanical stability.

8. Testing:

   • Before final assembly, test the device in a controlled environment to verify proper operation and output voltage regulation.