Instructions for Using LNK306GN-TL

1. Input Voltage:

   • Ensure the input voltage is within the specified range (85 VAC to 265 VAC) to avoid damage to the device.

2. Output Power:

   • The typical output power is 3.0 W, with a maximum of 3.3 W. Design your circuit to handle this power level.

3. Quiescent Current:

   • The quiescent current should be between 1.5 mA and 2.0 mA at 230 VAC. This is important for low-power applications.

4. Start-Up Current:

   • The start-up current is typically 1.0 mA and should not exceed 1.5 mA at 230 VAC. This ensures smooth startup without excessive current draw.

5. Minimum On-Time and Maximum Off-Time:

   • The minimum on-time is 1.6 μs to 2.0 μs, and the maximum off-time is 14.0 μs to 16.0 μs. These parameters are crucial for proper switching operation.

6. Thermal Shutdown:

   • The device will shut down if the temperature exceeds 150°C. Ensure adequate heat dissipation to prevent thermal shutdown.

7. Operating Temperature:

   • The operating temperature range is from -40°C to 85°C. Ensure the device operates within this range to maintain reliability.

8. Storage Temperature:

   • Store the device in an environment with temperatures ranging from -65°C to 150°C to prevent damage.

9. Junction-to-Ambient Thermal Resistance:

   • The junction-to-ambient thermal resistance is 150°C/W. Use appropriate heatsinks or cooling methods to manage heat dissipation.

10. Maximum Junction Temperature:

    • The maximum junction temperature is 150°C. Ensure that the device does not exceed this temperature during operation.

By following these parameters and instructions, you can ensure optimal performance and longevity of the LNK306GN-TL.