Instructions:

1. Handling and Storage:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle with care to avoid mechanical stress or damage to the leads.

2. Mounting:

   • Ensure proper alignment of the device during soldering to avoid short circuits.
   • Use a temperature-controlled soldering iron to prevent thermal shock.
   • Do not exceed the maximum power dissipation (200 mW) during operation.

3. Electrical Connections:

   • Connect the device according to the polarity markings on the package.
   • Ensure that the reverse breakdown voltage is not exceeded to prevent damage.

4. Operating Conditions:

   • Operate the device within the specified operating junction temperature range (-65°C to 150°C).
   • Monitor the forward current to ensure it does not exceed the rated values.

5. Testing:

   • Use a multimeter or other appropriate test equipment to verify the forward and reverse characteristics.
   • Test the device under controlled conditions to ensure accurate measurements.

6. Safety:

   • Follow all safety guidelines when handling and testing the device.
   • Use appropriate personal protective equipment (PPE) as necessary.