Share:
Specifications
SKU: 11553053
original binding quality products
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | Operating | 2.0 | - | 6.0 | V |
| Input Voltage (High) | VIH | - | 2.0 | - | VCC | V |
| Input Voltage (Low) | VIL | - | 0 | - | 0.8 | V |
| Output Voltage (High) | VOH | IO = -0.4 mA | - | - | VCC - 0.1 | V |
| Output Voltage (Low) | VOL | IO = 16 mA | 0 | - | 0.4 | V |
| Input Current (High) | IIH | VI = VCC | - | - | 20 | μA |
| Input Current (Low) | IIL | VI = 0 V | -1 | - | - | μA |
| Output Current (High) | IOH | VO = VCC - 1.5 V | - | - | -4 | mA |
| Output Current (Low) | IOL | VO = 0.4 V | 16 | - | - | mA |
| Propagation Delay Time (High to Low) | tpd(HL) | VCC = 5 V, TA = 25°C | 0 | - | 18 | ns |
| Propagation Delay Time (Low to High) | tpd(LH) | VCC = 5 V, TA = 25°C | 0 | - | 18 | ns |
| Storage Temperature Range | Tstg | - | -40 | - | 125 | °C |
| Operating Temperature Range | TA | - | 0 | - | 70 | °C |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 2.0 V to 6.0 V.
- Connect the ground (GND) pin to a stable 0 V reference.
Input Signals:
- For a high input (VIH), the voltage should be between 2.0 V and VCC.
- For a low input (VIL), the voltage should be between 0 V and 0.8 V.
- Ensure input currents do not exceed 20 μA for high inputs and -1 μA for low inputs.
Output Signals:
- When the output is high (VOH), the voltage will be close to VCC but at least VCC - 0.1 V.
- When the output is low (VOL), the voltage will be at most 0.4 V.
- The output can sink up to 16 mA and source up to -4 mA.
Propagation Delay:
- The propagation delay time (tpd) from input to output is typically 18 ns when VCC = 5 V and TA = 25°C.
Temperature Considerations:
- Store the device in a temperature range of -40°C to 125°C.
- Operate the device within a temperature range of 0°C to 70°C for optimal performance.
Handling:
- Handle with care to avoid damage from electrostatic discharge (ESD).
- Follow standard ESD protection guidelines during assembly and handling.
Application Notes:
- Use decoupling capacitors close to the power pins to minimize noise and ensure stable operation.
- Refer to the datasheet for detailed timing diagrams and additional application-specific information.
Inquiry - SN74HCT573N
