Share:
Specifications
SKU: 11553212
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Drain-Source Voltage | VDS | - | 500 | - | V | |
| Gate-Source Voltage | VGS | -15 | 0 | 20 | V | |
| Continuous Drain Current (TC = 25°C) | ID(25°C) | - | 28 | - | A | |
| Continuous Drain Current (TC = 100°C) | ID(100°C) | - | 16 | - | A | |
| Pulse Drain Current (TC = 25°C, tp = 10 ms, Duty Cycle = 1%) | IDM | - | 70 | - | A | |
| Power Dissipation (TC = 25°C) | PD(25°C) | - | 330 | - | W | |
| Power Dissipation (TC = 100°C) | PD(100°C) | - | 140 | - | W | |
| Junction Temperature | TJ | - | - | 150 | °C | |
| Storage Temperature Range | TSTG | -55 | - | 150 | °C | |
| Thermal Resistance, Junction to Case | RθJC | - | 0.5 | - | °C/W | |
| Total Gate Charge | QG | - | 90 | - | nC | VGS = 15V, ID = 28A |
| Input Capacitance | Ciss | - | 2500 | - | pF | VDS = 400V, f = 1 MHz |
| Output Capacitance | Coss | - | 210 | - | pF | VDS = 400V, f = 1 MHz |
| Reverse Transfer Capacitance | Crss | - | 400 | - | pF | VDS = 400V, f = 1 MHz |
Instructions for Use:
Handling Precautions:
- Avoid exposing the device to excessive mechanical stress.
- Handle with care to prevent damage to the leads and body.
Storage:
- Store in a dry, cool place away from direct sunlight and corrosive environments.
- Follow the storage temperature range specified in the table.
Mounting:
- Ensure proper heat sinking to manage the thermal resistance and maintain the junction temperature within safe limits.
- Use appropriate mounting hardware and techniques to ensure good thermal and electrical contact.
Electrical Connections:
- Apply gate-source voltage (VGS) within the specified range to avoid damage.
- Ensure that the drain-source voltage (VDS) does not exceed the maximum rating.
- Do not exceed the continuous or pulse drain current ratings under any operating conditions.
Testing:
- Use a suitable test setup to measure parameters such as input capacitance (Ciss), output capacitance (Coss), and reverse transfer capacitance (Crss).
- Follow standard testing procedures to ensure accurate measurements.
Safety:
- Always use appropriate safety equipment when handling high-voltage circuits.
- Follow all relevant safety guidelines and regulations.
Troubleshooting:
- If the device fails to operate correctly, check for proper connections, correct voltage levels, and thermal management.
- Refer to the datasheet for more detailed troubleshooting information.
Inquiry - STP28NM50N
