Instructions for Use:

1. Handling:

   • Handle with care to avoid damage to the leads and body.
   • Use appropriate static protection measures to prevent electrostatic discharge (ESD) damage.

2. Mounting:

   • Ensure proper alignment of the leads during soldering.
   • Soldering temperature should not exceed 260°C for more than 10 seconds.
   • Avoid excessive mechanical stress on the leads.

3. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly according to the datasheet pinout.
   • Ensure that the maximum ratings are not exceeded to prevent damage to the transistor.

4. Thermal Management:

   • If operating near the maximum power dissipation, consider using a heatsink to improve thermal performance.
   • Ensure adequate ventilation or cooling to maintain the operating temperature within the specified range.

5. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive environments.
   • Follow recommended storage conditions to ensure long-term reliability.

6. Testing:

   • Use a multimeter or transistor tester to verify the functionality of the transistor before installation.
   • Test under controlled conditions to avoid exceeding the maximum ratings.

7. Disposal:

   • Dispose of the transistor in accordance with local environmental regulations.
   • Recycle or dispose of electronic components responsibly.