Instructions for Use:

1. Mounting:

   • Ensure the device is securely mounted to a heatsink with adequate thermal paste to maintain optimal thermal performance.
   • Torque the mounting screws to the recommended values to avoid mechanical stress.

2. Electrical Connections:

   • Connect the collector (C), emitter (E), and gate (G) terminals correctly.
   • Use short, low-inductance leads to minimize parasitic inductance and prevent voltage spikes during switching.

3. Gate Drive:

   • Apply a gate-emitter voltage (Vge) within the specified range (-15V to +20V).
   • Use a gate resistor to limit current and reduce ringing.

4. Thermal Management:

   • Monitor the junction temperature (Tj) to ensure it does not exceed 175°C.
   • Use forced air cooling or liquid cooling if necessary to manage heat dissipation.

5. Overcurrent Protection:

   • Implement overcurrent protection to prevent damage from excessive collector current.
   • Consider using a current-limiting circuit or a fast-acting fuse.

6. Surge Handling:

   • The device can handle pulse currents up to 100A for 10ms. Ensure that surge conditions do not exceed these limits.

7. Storage and Handling:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle the device with care to avoid static discharge and mechanical damage.

8. Testing:

   • Before installation, test the device using a suitable tester to ensure it meets the specified parameters.
   • Perform regular maintenance checks to ensure continued reliable operation.