Below is the parameter table and instructions for the IML3160AK-TR:

Parameter Table

Instructions

1. Supply Voltage:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Operating Temperature:

   • The device operates reliably within the temperature range of -40°C to 85°C.
   • Store the device in temperatures between -65°C and 150°C.

3. Output Current:

   • The output can source or sink up to 10mA at a supply voltage of 5V and ambient temperature of 25°C.
   • Ensure that the load does not exceed this current limit to avoid overheating or damage.

4. Input Voltage Levels:

   • For high-level inputs, the voltage should be at least 0.7 times the supply voltage.
   • For low-level inputs, the voltage should be no more than 0.3 times the supply voltage.

5. Propagation Delay:

   • The propagation delay from input to output is typically 20ns to 50ns under standard conditions (VDD = 5V, Ta = 25°C).
   • Consider these delays in timing-sensitive applications.

6. Power Dissipation:

   • The maximum power dissipation is 100mW.
   • Ensure adequate heat sinking or cooling if the device is expected to dissipate significant power.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Use proper ESD protection measures during handling and installation.

8. Mounting:

   • Follow the recommended soldering profile to ensure reliable connections and avoid thermal damage.
   • Ensure that the PCB layout provides sufficient clearance and proper grounding.

By adhering to these parameters and instructions, you can ensure optimal performance and reliability of the IML3160AK-TR.