Share:
Specifications
SKU: 11557383
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Forward Voltage | VF | - | 1.2 | 1.6 | V | IF = 20 mA, TA = 25°C |
| Reverse Breakdown Voltage | VBR | 5 | - | 8 | V | IR = 1 mA, TA = 25°C |
| Output High Voltage | VOH | 2.4 | - | 5.5 | V | IO = -10 μA, VCC = 5.5 V, TA = 25°C |
| Output Low Voltage | VOL | 0 | 0.1 | 0.4 | V | IO = 16 mA, VCC = 5.5 V, TA = 25°C |
| Input Current | IF | 1 | 20 | 50 | mA | VF = 1.2 V, TA = 25°C |
| Propagation Delay Time | tPLH | - | 100 | 200 | ns | VCC = 5.5 V, IF = 20 mA, RL = 200 Ω, TA = 25°C |
| Propagation Delay Time | tPHL | - | 100 | 200 | ns | VCC = 5.5 V, IF = 20 mA, RL = 200 Ω, TA = 25°C |
| Storage Temperature | TSTG | -40 | - | 110 | °C | - |
Instructions for Use:
Power Supply:
- Ensure that the supply voltage (VCC) is within the specified range (2.4 V to 5.5 V).
- Connect the power supply to the VCC pin and ground to the GND pin.
Input Signal:
- Apply the input current (IF) to the input pin.
- The typical forward current (IF) is 20 mA, but it can range from 1 mA to 50 mA.
Output Signal:
- The output will be high (VOH) when no input current is applied.
- The output will be low (VOL) when the input current is applied.
- Ensure that the load resistance (RL) is appropriate for the output current requirements.
Temperature Considerations:
- Operate the device within the storage temperature range (-40°C to 110°C).
- For optimal performance, maintain the operating temperature as close to 25°C as possible.
Propagation Delay:
- The propagation delay times (tPLH and tPHL) are critical for timing applications.
- Ensure that the system design accounts for these delays to avoid timing issues.
Handling Precautions:
- Handle the device with care to avoid static damage.
- Follow proper soldering techniques to prevent thermal stress on the device.
Storage and Packaging:
- Store the device in a dry, cool place.
- Use anti-static packaging to protect the device during storage and transportation.
By following these parameters and instructions, you can ensure reliable and efficient operation of the TLP350H optocoupler.
(For reference only)Inquiry - TLP350H
