Share:
Specifications
SKU: 11558428
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Drain-Source Voltage | VDS | - | - | 40 | V | Maximum drain-source voltage |
| Gate-Source Voltage | VGS | -10 | - | 10 | V | Maximum gate-source voltage |
| Continuous Drain Current | ID | - | 3.5 | - | A | Continuous drain current at TC = 25°C |
| Pulse Drain Current | ID(pulse) | - | 8.5 | - | A | Pulse drain current (tp = 100 μs) |
| Power Dissipation | PD | - | - | 3.9 | W | Maximum power dissipation at TA = 25°C |
| Junction Temperature | TJ | - | - | 150 | °C | Maximum junction temperature |
| Storage Temperature | TSTG | -55 | - | 150 | °C | Operating temperature range |
| Gate Charge | QG | - | 35 | - | nC | Total gate charge |
| Input Capacitance | Ciss | - | 200 | - | pF | Input capacitance |
| Output Capacitance | Coss | - | 60 | - | pF | Output capacitance |
| RDS(on) at VGS=10V, ID=3.5A | RDS(on) | - | 25 | - | mΩ | On-state resistance |
Instructions for Use:
Voltage Ratings:
- Ensure that the drain-source voltage (VDS) does not exceed 40V.
- The gate-source voltage (VGS) should be within -10V to +10V.
Current Handling:
- The continuous drain current (ID) should not exceed 3.5A at a case temperature (TC) of 25°C.
- For pulse applications, the peak drain current (ID(pulse)) can go up to 8.5A for a pulse duration of 100 μs.
Power Dissipation:
- The maximum power dissipation (PD) is 3.9W at an ambient temperature (TA) of 25°C. Ensure proper heat sinking if operating near this limit.
Temperature Considerations:
- The junction temperature (TJ) must not exceed 150°C.
- The device can be stored between -55°C and 150°C.
Capacitance and Gate Charge:
- The input capacitance (Ciss) is approximately 200pF.
- The output capacitance (Coss) is approximately 60pF.
- The total gate charge (QG) is about 35nC.
On-State Resistance:
- The on-state resistance (RDS(on)) is 25mΩ when VGS is 10V and ID is 3.5A.
Handling and Mounting:
- Handle the device with care to avoid static damage.
- Ensure proper mounting to maintain thermal performance and reliability.
Testing and Verification:
- Verify all parameters during testing to ensure the device operates within specified limits.
- Use appropriate test equipment and methods to measure and validate performance.
By following these guidelines, you can ensure optimal performance and longevity of the FDMS2572 device.
(For reference only)Inquiry - FDMS2572
