Instructions for Using the CD4513:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 3.0V to 18V.
   • Connect the positive terminal of the power supply to V_CC and the negative terminal to GND.

2. Input Logic Levels:

   • For a logic low, the input voltage should be between 0V and 0.8V.
   • For a logic high, the input voltage should be between 2.0V and V_CC.

3. Output Current:

   • The output can sink up to 6mA (I_OL) and source up to 0.4mA (I_OH).
   • Ensure that the load connected to the output does not exceed these current limits.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 25ns, with a maximum of 100ns.
   • The high-to-low and low-to-high propagation delays (t_phl and t_plh) are also 25ns to 100ns.
   • The maximum propagation delay (t_pd(max)) is 150ns.

5. Temperature Ranges:

   • The operating temperature range is from -40°C to 85°C.
   • The storage temperature range is from -65°C to 150°C.

6. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration and functions.
   • Ensure all unused inputs are tied to a known state (either V_CC or GND) to avoid floating inputs.

7. Decoupling Capacitors:

   • Place a 0.1μF ceramic capacitor close to the V_CC and GND pins to filter out noise and stabilize the supply voltage.

8. Handling Precautions:

   • The CD4513 is sensitive to electrostatic discharge (ESD). Use proper ESD protection when handling the device.
   • Avoid exceeding the maximum ratings specified in the datasheet to prevent damage to the device.