Instructions for Use:

1. Power Supply:

   • Ensure the device is powered within the specified Vcc range (2.7V to 3.6V).
   • No external Vpp is required for programming or erasing.

2. Programming:

   • Use the standard programming algorithm for flash memory.
   • Typical programming time is 5 μs per byte.

3. Erasing:

   • Erase operations are performed on a block-by-block basis.
   • Typical erase time is 1 second per block.

4. Read Operations:

   • Access times are typically 70 nanoseconds.
   • Ensure proper timing and control signals are used for reliable data read.

5. Temperature Considerations:

   • The device is rated for industrial temperature ranges (-40°C to +85°C).
   • Store the device within the storage temperature range (-65°C to +150°C).

6. Current Consumption:

   • Standby current is very low at 1 μA when the device is not active.
   • Active current consumption is 20 mA during read/write operations.

7. Endurance and Data Retention:

   • The device can withstand up to 100,000 write/erase cycles.
   • Data retention is guaranteed for 10 years under normal operating conditions.

8. Handling:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage.
   • Follow standard ESD protection guidelines during handling and assembly.

9. Package Information:

   • The AM28F010-120JC is available in a 32-pin TSOP package.
   • Refer to the datasheet for detailed pin configurations and mechanical dimensions.

For more detailed information, refer to the official datasheet provided by the manufacturer.