Share:
Specifications
SKU: 11582974
| Parameter | Symbol | Min | Typical | Max | Unit | Condition |
|---|---|---|---|---|---|---|
| Drain-Source Voltage | VDS | -55 | - | 55 | V | Continuous |
| Gate-Source Voltage | VGS | -20 | - | 20 | V | Continuous |
| Continuous Drain Current | ID | - | 80 | - | A | @ TC = 25°C |
| Pulse Drain Current | ID(p) | - | 160 | - | A | @ TC = 25°C, tp = 10 μs, Duty Cycle 1% |
| Power Dissipation | PD | - | - | 170 | W | @ TC = 25°C |
| Junction Temperature | TJ | - | - | 150 | °C | |
| Storage Temperature Range | Tstg | -55 | - | 150 | °C | |
| Total Gate Charge | QG | - | 140 | - | nC | @ VDS = 500V, ID = 8A, VGS = 10V |
| Input Capacitance | Ciss | - | 3300 | - | pF | @ VDS = 500V, f = 1 MHz |
| Output Capacitance | Coss | - | 1100 | - | pF | @ VDS = 500V, f = 1 MHz |
| Reverse Transfer Capacitance | Crss | - | 700 | - | pF | @ VDS = 500V, f = 1 MHz |
| On-State Resistance | RDS(on) | - | 0.085 | - | Ω | @ VGS = 10V, ID = 8A |
| Gate Threshold Voltage | VGS(th) | 2.0 | 2.5 | 4.0 | V | @ ID = 250 μA |
| Maximum Gate Current (turn-on/turn-off) | IGM | - | ±20 | - | A | @ VDS = 500V, ID = 8A, VGS = 10V |
Instructions for Use:
Handling Precautions:
- Handle the device with care to avoid damage to the pins.
- Use proper ESD (Electrostatic Discharge) protection when handling the device.
Mounting and Soldering:
- Ensure the device is securely mounted on the PCB.
- Follow recommended soldering profiles to prevent thermal damage.
- Use a heat sink if necessary to manage power dissipation.
Operating Conditions:
- Do not exceed the maximum ratings specified in the table.
- Monitor the junction temperature to ensure it remains within safe limits.
- Use appropriate cooling methods (e.g., heat sinks, fans) to maintain temperature within operational limits.
Circuit Design:
- Ensure the gate drive circuit can provide the necessary current to switch the device quickly.
- Use suitable snubber circuits to protect against voltage spikes during switching.
- Consider the parasitic inductances in the layout to minimize switching losses.
Storage:
- Store the device in a dry, cool place to prevent moisture damage.
- Follow recommended storage conditions to ensure long-term reliability.
Testing:
- Perform initial testing under controlled conditions to verify proper operation.
- Use appropriate test equipment to measure key parameters such as VDS, ID, and RDS(on).
Inquiry - STP80PF55
