Share:
Specifications
SKU: 11584078
| Parameter | Description | Value |
|---|---|---|
| Device Name | Ethernet Switch Controller | 88E6063-RCJ1 |
| Package Type | QFN (Quad Flat No-Lead) | 48-Pin |
| Operating Voltage | Supply Voltage for Core (VCC) | 1.2V |
| Operating Voltage | Supply Voltage for I/O (VIO) | 3.3V |
| Operating Temperature | Industrial Temperature Range | -40°C to +85°C |
| Data Rate | Ethernet Data Rate | 10/100 Mbps |
| Ports | Number of Ethernet Ports | 6 |
| MACs | Number of MACs | 6 |
| PHYs | Integrated PHYs | 5 |
| Management Interface | Management Interface | MDIO, SMBus, SPI, I2C |
| RAM Size | Internal RAM | 128 KB |
| Features | VLAN Support | Yes |
| Features | Quality of Service (QoS) | Yes |
| Features | Jumbo Frame Support | Yes (up to 9 KB) |
| Features | Energy Efficient Ethernet (EEE) | Yes |
| Features | Auto-Negotiation | Yes |
| Features | Auto-MDI/MDIX | Yes |
| Features | Cable Diagnostics | Yes |
| Features | Wake-on-LAN (WoL) | Yes |
| Features | Power Over Ethernet (PoE) Support | Yes (Optional) |
| Pin Pitch | Pin Pitch | 0.5 mm |
| Dimensions | Package Dimensions | 7 mm x 7 mm |
Instructions for Use
Power Supply:
- Connect VCC (1.2V) to the core power supply.
- Connect VIO (3.3V) to the I/O power supply.
Reset:
- Apply a reset signal to the RESET pin to initialize the device.
Configuration:
- Use the management interface (MDIO, SMBus, SPI, or I2C) to configure the switch settings, such as VLANs, QoS, and port settings.
Ethernet Connections:
- Connect the Ethernet ports to the desired devices or networks.
- Ensure that the auto-negotiation feature is enabled to automatically configure the link speed and duplex mode.
Firmware Update:
- If necessary, update the firmware using the provided tools and the management interface.
Monitoring:
- Monitor the status of the switch using the management interface to ensure proper operation and to diagnose any issues.
Power Over Ethernet (PoE):
- If PoE is supported and required, ensure that the power sourcing equipment (PSE) is correctly configured to provide power to the powered devices (PD).
Cable Diagnostics:
- Use the cable diagnostics feature to check the integrity of the Ethernet cables connected to the switch.
Wake-on-LAN (WoL):
- Configure the WoL settings to allow remote wake-up of connected devices.
Energy Efficient Ethernet (EEE):
- Enable EEE to reduce power consumption during periods of low data activity.
Jumbo Frames:
- Configure the switch to support jumbo frames if required by your network environment.
Storage and Handling:
- Store the device in a dry, static-free environment.
- Handle the device with care to avoid damage to the pins and package.
For detailed specifications and advanced configuration, refer to the datasheet and application notes provided by the manufacturer.
(For reference only)Inquiry - 88E6063-RCJ1
