Share:
Specifications
SKU: 11584775
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.75 | - | 5.25 | V | Operating supply voltage |
| Input High Voltage | VIH | 2.0 | - | 5.5 | V | Minimum input high voltage |
| Input Low Voltage | VIL | 0.0 | - | 0.8 | V | Maximum input low voltage |
| Output High Voltage (IOL = 0.4 mA) | VOH | 2.4 | - | 5.0 | V | Minimum output high voltage |
| Output Low Voltage (IOH = -0.4 mA) | VOL | 0.0 | - | 0.5 | V | Maximum output low voltage |
| Propagation Delay Time | tpd | - | 12 | 22 | ns | Time delay from input to output change |
| Power Dissipation | PD | - | - | 500 | mW | Maximum power dissipation |
| Operating Temperature | TA | -40 | - | 85 | °C | Ambient operating temperature range |
| Storage Temperature | TSTG | -65 | - | 150 | °C | Temperature range for storage |
Instructions for Using SN74S153N
Power Supply:
- Connect the VCC pin to a 5V power supply.
- Ground the GND pin.
Input Signals:
- Apply logic high (VIH) or low (VIL) signals to the input pins (A0, A1, B0, B1).
- Ensure that the input voltages are within the specified range to avoid damage.
Output Signals:
- The outputs (Y0, Y1) will follow the selected input based on the control signals (S0, S1).
- Ensure that the load connected to the outputs does not exceed the maximum current ratings.
Control Signals:
- Use the control signals (S0, S1) to select which input (A0, A1, B0, B1) is routed to the output (Y0, Y1).
- The truth table for the control signals is as follows:
- S0 = 0, S1 = 0: Y0 = A0, Y1 = A1
- S0 = 1, S1 = 0: Y0 = B0, Y1 = B1
- S0 = 0, S1 = 1: Y0 = A1, Y1 = A0
- S0 = 1, S1 = 1: Y0 = B1, Y1 = B0
Propagation Delay:
- The time delay from the input signal change to the output signal change (tpd) should be considered in timing-critical applications.
Temperature Considerations:
- Operate the device within the specified temperature ranges to ensure reliable performance.
- Store the device in a dry environment within the storage temperature range.
Handling:
- Handle the device with care to avoid static discharge, which can damage the internal circuits.
- Use appropriate ESD protection measures when handling and installing the device.
Inquiry - SN74S153N
