Instructions for Use:

1. Mounting and Handling:

   • Ensure that the mounting surfaces are clean and flat.
   • Apply thermal compound between the transistor and heat sink for optimal heat dissipation.
   • Avoid excessive mechanical stress on the leads during soldering.

2. Soldering:

   • Use a temperature-controlled soldering iron or station.
   • Soldering temperature should not exceed 300°C.
   • Soldering time should be kept to a minimum, typically no more than 3 seconds per lead.

3. Electrical Connections:

   • Connect the collector to the high-voltage side of the circuit.
   • Connect the emitter to the low-voltage side of the circuit.
   • The base is used to control the flow of current between the collector and emitter.

4. Operating Conditions:

   • Ensure that the operating voltage and current do not exceed the maximum ratings.
   • Monitor the junction temperature to prevent overheating.
   • Use appropriate heat sinks to maintain the junction temperature within safe limits.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid damage to the leads and the semiconductor junction.

6. Testing:

   • Use a multimeter to check for continuity and resistance between the leads.
   • Test the transistor in a controlled environment to ensure it meets the specified parameters.

7. Safety:

   • Always use proper safety equipment when handling high voltages.
   • Follow all local regulations and guidelines for electrical work.